[2026] Get Top-Rated VMware 2V0-11.25 Exam Dumps Now [Q31-Q52]

[2026] Get Top-Rated VMware 2V0-11.25 Exam Dumps Now

Passing Key To Getting 2V0-11.25 Certified Exam Engine PDF

NEW QUESTION # 31
An administrator is troubleshooting a high CPU usage issue in a VMware Cloud Foundation environment running IaaS Control Plane. Several namespaces are reporting degraded performance.
What two steps should the administrator take to diagnose and potentially resolve the issue? (Choose two.)

• A. Check the resource limits and reservations set on the Kubernetes namespaces.
• B. Reconfigure the DRS settings to be more aggressive in load balancing.
• C. Review the CPU usage of the ESXi hosts to identify any that are overcommitted.
• D. Reboot the supervisor cluster to clear any temporary issues.
• E. Upgrade the vSphere version to the latest release.

Answer: A,C

Explanation:
The administrator should review the CPU usage of the ESXi hosts to identify if any hosts are overcommitted. Overcommitted hosts can lead to performance degradation across workloads.
Checking the resource limits and reservations on Kubernetes namespaces is crucial. If the resource limits are too low or improperly configured, it could cause degraded performance for workloads running in those namespaces.

NEW QUESTION # 32
An administrator is tasked with deploying a new, highly-available application on a VMware Cloud Foundation (VCF)-based private cloud. The new application will include both virtual machines and containers.
Which two components of VCF could the administrator use to complete the task? (Choose two.)

• A. Supervisor
• B. HCX
• C. Aria Suite Lifecycle
• D. NSX
• E. Aria operations

Answer: A,D

Explanation:
NSX provides the networking, security, and load-balancing services needed for high availability, while vSphere Supervisor enables Kubernetes integration alongside VMs, allowing you to run and manage containerized workloads on the same platform.

NEW QUESTION # 33
What three steps are required to commission a new host into the SDDC Manager inventory? (Choose three.)

• A. Four NIC ports with a minimum 10 Gbps speed.
• B. Self-signed certificate regenerated based on FQDN of host.
• C. Delete all disk partitions on HDD/SSD.
• D. Update the DNS records and add the host directly to the SDDC Manager appliance using the root credentials.
• E. A supported version of ESXi installed on the host.
• F. Manually import the host into the vCenter Server inventory and assign it to a cluster.

Answer: B,C,E

Explanation:
As documented in the official VMware Cloud Foundation Administration Guide for Host Commissioning:
A). Self-signed certificate regenerated based on FQDN of host.Exact Extract:
"During the commissioning process, SDDC Manager regenerates a self-signed certificate for the host based on its FQDN to ensure secure communications and integration with the management domain." C). Delete all disk partitions on HDD/SSD.Exact Extract:
"Before commissioning, all partitions must be deleted from the host's disks to allow SDDC Manager to claim storage for vSAN or other use. Failure to remove partitions can cause the commissioning workflow to fail." F). A supported version of ESXi installed on the host.Exact Extract:
"The host must be installed with a version of ESXi that is supported by the current release of VMware Cloud Foundation. Unsupported versions will cause the commissioning operation to fail." Why Not the Other Options?
B:While having multiple 10Gbps NICs is recommended, it is not a strict commissioning requirement for all host profiles.
D:Updating DNS is necessary, but the step of "adding the host directly to SDDC Manager using root credentials" is incomplete, as SDDC Manager itself performs the addition and validation steps.
E:Manually adding hosts to vCenter is not permitted; SDDC Manager must orchestrate the entire host onboarding process.
Summary:
The three required steps to commission a new host into the SDDC Manager inventory are:
A). Regenerate the self-signed certificate based on the FQDN,
C). Delete all disk partitions on HDD/SSD,
F). Ensure a supported version of ESXi is installed.
These steps are explicitly outlined in the VMware Cloud Foundation host commissioning documentation.

NEW QUESTION # 34
Which two SDDC Manager operations can be executed on an NSX Edge cluster after it has been deployed? (Choose two.)

• A. Delete
• B. Expand
• C. Redeploy
• D. Shrink
• E. |Sync

Answer: A,E

Explanation:
After an NSX Edge cluster has been deployed, you can perform a sync operation to ensure the NSX Edge cluster is in sync with the configuration in SDDC Manager.
Deleting an NSX Edge cluster can be done after it has been deployed if it is no longer required or needs to be removed from the environment.

NEW QUESTION # 35
What is the primary benefit of creating a VM template in VMware vCenter?

• A. It enables direct physical access to the underlying hardware.
• B. It simplifies the process of taking snapshots of VMs.
• C. It provides enhanced network security for VMs.
• D. It accelerates the deployment of VMs with predefined configurations.

Answer: D

Explanation:
The primary benefit of creating a VM template in VMware vCenter is that it allows for the rapid deployment of virtual machines (VMs) with predefined configurations, including the operating system, installed applications, and other settings. This accelerates the process of provisioning VMs, ensuring consistency and saving time during deployment.

NEW QUESTION # 36
Following an update to the Information Security policy, an administrator has been reviewing the status SSL certificates within the VMware Cloud Foundation (VCF) solution.
The new Information Security Policy states:
All SSL certificates must be generated and signed from the shared Microsoft Certificate Authority (CA).
The administrator has discovered the following:
All Aria Suite Components already use CA-signed Subject Alternate Name (SAN) SSL certificates.
All other VCF-based SSL certificates are either self-signed or generated using the VMware Certificate Authority (VMCA).
Which three steps must the administrator take to ensure the VCF solution remains compliant and managed by SDDC Manager? (Choose three.)

• A. In SDDC Manager, replace the SSL certificates for vCenter, NSX Manager, SDDC Manager and Aria Suite Lifecycle.
• B. Integrate the OpenSSL CA into SDDC Manager.
• C. In Aria Suite Lifecycle, replace the VMware Identity Manager, Aria Automation, Aria Operations and Aria Operations for Logs SSL certificates.
• D. Integrate the Microsoft CA into SDDC Manager.
• E. In VMware vCenter, replace the ESXi SSL certificates.
• F. In SDDC Manager, replace the SSL certificates for vCenter, ESXi, NSX Manager, SDDC Manager and Aria Suite Lifecycle.

Answer: A,D,F

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
As per the VMware Cloud Foundation Administration Guide, the official and supported process for moving all solution certificates under a Microsoft Certificate Authority, while keeping management and lifecycle operations compliant with SDDC Manager, is as follows:
C . Integrate the Microsoft CA into SDDC Manager.
Exact Extract:
"To replace SSL certificates for VMware Cloud Foundation components using SDDC Manager, you must first integrate your Microsoft CA with SDDC Manager. This allows SDDC Manager to automate the certificate signing process using the organization's enterprise CA." F . In SDDC Manager, replace the SSL certificates for vCenter, ESXi, NSX Manager, SDDC Manager and Aria Suite Lifecycle.
Exact Extract:
"With Microsoft CA integration, you can use SDDC Manager to generate and replace SSL certificates for all key solution components, including vCenter, ESXi, NSX Manager, SDDC Manager, and Aria Suite Lifecycle. This process ensures full visibility and management through SDDC Manager." D . In SDDC Manager, replace the SSL certificates for vCenter, NSX Manager, SDDC Manager and Aria Suite Lifecycle.
Exact Extract:
"Certificate replacement workflows in SDDC Manager allow you to select which managed components have their certificates replaced with CA-signed certificates. You must select and update all components that are not already using compliant CA-signed certificates." Why Not the Other Options?
A: ESXi certificate replacement should be managed via SDDC Manager for compliance, not directly in vCenter.
B: OpenSSL CA is not part of the company's security policy or supported by the current workflow.
E: Aria Suite Lifecycle and its components already use CA-signed certificates, so this action is not needed.
Summary:
To ensure compliance with the updated security policy and maintain management with SDDC Manager, the administrator must:
Integrate the Microsoft CA into SDDC Manager (C),
Use SDDC Manager to replace all relevant solution SSL certificates for vCenter, ESXi, NSX Manager, SDDC Manager, and Aria Suite Lifecycle (F), And use SDDC Manager's certificate replacement workflow to update any components still requiring CA-signed certificates (D).
These steps are mandated and supported by VMware Cloud Foundation official documentation.

NEW QUESTION # 37
An administrator is preparing to deploy VMware Aria Suite Lifecycle using SDDC Manager.
Which three are prerequisites for deploying Aria Suite Lifecycle? (Choose three.)

• A. Ensure that the Application Virtual Networks have been configured.
• B. Ensure the VMware Software Install Bundle for VMware Aria Suite Lifecycle is in the local bundle repository.
• C. Verify that the password for the admin(g>local user account meets the complexity requirements.
• D. Ensure that the NTP and DNS settings specified in SDDC Manager are valid for all management components.
• E. Ensure that a custom SSL certificate specifying the FQDN of the appliance is available.

Answer: B,D,E

Explanation:
Ensure that a custom SSL certificate specifying the FQDN of the appliance is available: A custom SSL certificate for the FQDN of the Aria Suite Lifecycle appliance is required for secure communication between components.
Ensure that the NTP and DNS settings specified in SDDC Manager are valid for all management components:
Accurate NTP and DNS settings are crucial for time synchronization and proper domain resolution in the environment.
Ensure the VMware Software Install Bundle for VMware Aria Suite Lifecycle is in the local bundle repository: The required software bundle must be available in the local repository to ensure successful deployment.

NEW QUESTION # 38
An administrator has deployed a new VMware Cloud Builder appliance using the downloaded OVF file.
While attempting to use the VMware Cloud Builder interface, the administrator discovers that no connection can be established to the appliance.
Which three configuration errors may have occurred? (Choose three.)

• A. Incorrect DNS settings or inaccessible DNS servers.
• B. VLAN misconfiguration.
• C. Incorrect Dynamic IP configuration.
• D. BGP routing misconfiguration.
• E. Incorrect NTP settings or inaccessible NTP servers.
• F. Incorrect Static IP configuration.

Answer: A,B,F

Explanation:
A VLAN misconfiguration could prevent proper network connectivity, particularly if the appliance is not in the correct VLAN or if there is a misalignment in network segmentation.
Incorrect DNS settings or inaccessible DNS servers can prevent the VMware Cloud Builder appliance from being able to resolve hostnames, leading to connection issues.
Incorrect Static IP configuration would result in the appliance being unreachable because it won't have the correct IP address or network configuration to communicate with other components.

NEW QUESTION # 39
An administrator successfully removed a host from a VMware vSphere cluster and decommissioned it in SDDC Manager.
What must be done before the host can be recommissioned and added back to the SDDC Manager inventory?

• A. Manually uninstall the NSX VIBs on the host.
• B. Reinstall ESXi on the host.
• C. From the host console, use the /sbin/qenerate-certifcates command to qenerate a new self-siqned certificate.
• D. Loq in to the host console and select "Reset System Configuration" from the ESXi DCUI.

Answer: D

Explanation:
Before the host can be recommissioned and added back to the SDDC Manager inventory, you must reset the system configuration. This can be done from the ESXi Direct Console User Interface (DCUI) by selecting the "Reset System Configuration" option. This will remove any previous configuration and allow the host to be re-added to the environment.

NEW QUESTION # 40
An administrator needs to scale an NSX Edge cluster by adding additional Edge nodes.
Which three steps must be taken before scaling an Edge cluster from SDDC Manager? (Choose three.)

• A. Assign a unique management IP for each Edge node.
• B. Add an additional NSX VDS uplink for each Edqe node beinq added.
• C. Place the Edge cluster in maintenance mode prior to expanding.
• D. Verify DNS records have been added for each new Edge node.
• E. Assign two Tunnel Endpoint (TEP) addresses for each Edge node.

Answer: A,D,E

Explanation:
Each new Edge node requires its own unique management IP address for NSX management traffic.
Edge nodes need two Tunnel Endpoint (TEP) addresses to participate in the overlay transport.
DNS A records must exist for each new Edge node so the cluster can resolve and register them properly.

NEW QUESTION # 41
A virtual private cloud administrator is regularly tasked to provision and manage new application workloads with dedicated subnets.
Which two capabilities of VMware Cloud Foundation (VCF) can be used to alleviate the workload of the administrator with minimal interaction with the networking team? (Choose two.)

• A. Deploy Aria Automation to enable self-service provisioning.
• B. Use vSphere Resource Pools to allocate networking resources to different applications.
• C. Configure vSAN storage policies for each application.
• D. Use of NSX overlay networks.

Answer: A,D

Explanation:
Deploying VMware Aria Automation enables self-service blueprints that allow the administrator or application owners to provision workloads, including dedicated networks, without direct requests to the networking team.
NSX overlay networks decouple the virtual network from the physical underlay, enabling the creation of tenant-specific subnets on demand without changes to the physical network.

NEW QUESTION # 42
What are three prerequisites for deploying an NSX Edge cluster in a VMware Cloud Foundation (VCF) solution? (Choose three.)

• A. Use separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.
• B. Create DNS entries for the NSX Edge nodes.
• C. Set up vSAN storage policies for the Edge VMs.
• D. Configure BGP as a dynamic routing protocol on the physical switches.
• E. Install Aria Operations and enable Edge Cluster monitoring.
• F. Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.

Answer: A,B,F

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
According to the VMware Cloud Foundation 5.2 Planning and Preparation Guide and the VMware NSX-T Data Center Installation Guide, the following are critical prerequisites before deploying an NSX Edge cluster in a VCF environment:
B . Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.
Exact Extract:
"The NSX host overlay network and the NSX Edge overlay network must be able to route traffic between each other to allow tunnel establishment and VM-to-edge connectivity." (VMware NSX-T Data Center Installation Guide, VMware Cloud Foundation Planning and Preparation Guide) C . Create DNS entries for the NSX Edge nodes.
Exact Extract:
"You must create forward and reverse DNS records for each NSX Edge node before deployment. DNS resolution is required for NSX Manager and general network functionality." (VMware Cloud Foundation Planning and Preparation Guide) D . Use separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.
Exact Extract:
"The NSX host overlay and the NSX Edge overlay must be on different VLANs and subnets to ensure proper logical separation and traffic flow within the NSX infrastructure." (VMware NSX-T Data Center Installation Guide, VMware Cloud Foundation Planning and Preparation Guide) Why Not the Other Options?
A: vSAN storage policies for Edge VMs are not a documented prerequisite for Edge deployment.
E: BGP configuration is required at a later stage for north-south routing, but not as a deployment prerequisite.
F: Aria Operations is optional and used for monitoring, not a deployment prerequisite.
Summary:
Before deploying an NSX Edge cluster in a VCF environment, you must:
Ensure routing between NSX host and Edge overlay VLANs (B),
Create DNS entries for the NSX Edge nodes (C),
Use separate VLAN IDs and subnets for host and Edge overlays (D).
These prerequisites are confirmed in the official VMware Cloud Foundation and NSX documentation.

NEW QUESTION # 43
Which four storage options are available in the SDDC Manager UI during deployment of a VI workload domain in VMware Cloud Foundation? (Choose four.)

• A. vSAN
• B. NFS
• C. vVol
• D. iSCSCI
• E. VMFS on FC
• F. DATASTOR
• G. VMS on NFS

Answer: A,B,C,E

Explanation:
NFS: NFS (Network File System) can be used as a storage option during the deployment of a VI workload domain, typically for storing virtual machine files.
vVol: vVol (Virtual Volumes) provides a storage framework to allow for policy-driven management of virtual machine storage.
VMFS on FC: VMFS (VMware File System) on Fibre Channel (FC) provides block-level storage for virtual machines and is widely used in VMware environments.
vSAN: vSAN (Virtual SAN) is VMware's hyper-converged storage solution, which combines compute and storage resources in a VMware environment, and is available as a storage option for a workload domain.

NEW QUESTION # 44
Which is the appropriate first action to take to resolve dropped network packets on an ESXi host?

• A. Migrate VMs to another data store
• B. Enable Storage I/O Control
• C. Increase the CPU and memory allocation for VMs
• D. Check physical network switch configuration

Answer: D

Explanation:
Dropped network packets are often caused by misconfigurations or issues at the physical network layer.
Checking the physical network switch configuration is the first step to ensure that the network settings, such as VLANs, uplinks, and port configurations, are correctly set up. This ensures proper connectivity and traffic flow for the ESXi host and the VMs.

NEW QUESTION # 45
An administrator recently incorrectly deployed a new isolated VI workload domain within an existing VMware Cloud Foundation (VCF) instance.
How can the administrator reconfigure the VI workload domain to share the SSO domain from the management workload domain?

• A. A new VI workload domain must be created through SDDC Manager.
• B. From the SDDC Manager console, migrate the VI workload domain to the management domain.
• C. From the VI workload domain vCenter Server instance, add the management domain SSO and remove the isolated SSO.
• D. From the management domain vCenter Server instance, use the rsautil command to add the VI workload domain to the management domain.

Answer: A

Explanation:
According to VMware Cloud Foundation documentation, once a VI workload domain has been deployed as an isolated domain (with its own SSO), it cannot be reconfigured after deployment to join the management domain's SSO domain. The official guidance states that the only supported approach is to delete the incorrectly configured VI workload domain and create a new one through SDDC Manager, ensuring it is properly configured to share the SSO domain with the management domain during the deployment process.
There is no supported process to convert or migrate an existing isolated SSO VI workload domain to a shared SSO configuration after deployment.

NEW QUESTION # 46
What is the recommended method for managing IP address allocation for VMware ESXi hosts in a VMware Cloud Foundation environment?

• A. Static IP address assigned using VMware NSX IP Pools
• B. Dynamic IP addresses assigned via DHCP with reservations
• C. Dynamic IP addresses assigned via DHCP and without any reservations
• D. Static IP addresses assigned manually

Answer: A

Explanation:
In a VMware Cloud Foundation environment, it is recommended to use static IP addresses that are managed via VMware NSX IP Pools. This method ensures consistency, scalability, and centralized management of IP addresses, which is essential for large environments. NSX IP Pools allow for efficient IP address allocation and management.

NEW QUESTION # 47
An organization has 3 data center sites and is implementing a solution to achieve a Recovery Point Objective (RPO) of 0 to ensure continuous availability of storage in the event of a single site failure. The sites are connected via a high bandwidth/low latency link.
Which two VMware Cloud Foundation (VCF) components can be used to support this capability? (Choose two.)

• A. vSAN
• B. Aria Operations
• C. NSX
• D. vSphere Replication
• E. vSphere

Answer: A,E

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
To achieve an RPO of 0 (zero data loss) with continuous availability of storage across multiple sites, VMware Cloud Foundation leverages two key components:
vSphere (A): vSphere provides the core platform for compute virtualization, including features such as VMware vSphere HA (High Availability) and VMware vSphere Fault Tolerance, both of which are integral to delivering continuous VM availability and supporting cross-site failover.
vSAN (E): vSAN can be configured in a stretched cluster deployment across the three sites. With a stretched vSAN cluster, data is synchronously replicated between sites, ensuring that all writes are committed to more than one location. This synchronous replication provides true continuous availability and a Recovery Point Objective (RPO) of 0 in the event of a single site failure, provided that the network meets high bandwidth and low latency requirements.
Other components such as Aria Operations and NSX do not provide storage-level availability or synchronous data protection. vSphere Replication only supports asynchronous replication and cannot guarantee RPO of 0.

NEW QUESTION # 48
An administrator needs to perform lifecycle management for their VMware Cloud Foundation (VCF) components, including upgrading SDDC Manager.
Which three steps should be followed to upgrade VCF? (Choose three.)

• A. Use the SDDC Manager Ul to initiate the upgrade process.
• B. Disable DRS and HA on all clusters before initiating the upgrade.
• C. Perform a pre-checkto ensure that all components are compatible with the new version.
• D. Manually download the update bundles with a secure browser from the VMware website.
• E. Backup all VMware Cloud Foundation components before starting the upgrade.

Answer: A,C,E

Explanation:
Running a compatibility pre-check validates that vCenter, ESXi, NSX, and other components meet the requirements for the target VCF version.
Backing up SDDC Manager, vCenter, NSX, and other critical components ensures you can roll back if the upgrade encounters issues.
The SDDC Manager UI provides an orchestrated upgrade workflow, downloading and applying the required bundles in the correct order.

NEW QUESTION # 49
Which option should be chosen when placing a vSAN host into maintenance mode to ensure all data remains accessible during maintenance, while minimizing the time required to complete the operation?

• A. Quick Migration
• B. No Data Migration
• C. Full Data Migration
• D. Ensure Accessibility

Answer: D

Explanation:
When placing a vSAN host into maintenance mode, choosing "Ensure Accessibility" ensures that all data remains accessible during the maintenance operation. It moves data off the host only if necessary, prioritizing accessibility while minimizing downtime. This option is designed to minimize the time required to complete the operation compared to "Full Data Migration."

NEW QUESTION # 50
Match each vSphere HA host state issue with its troubleshooting step.

Answer:

Explanation:

NEW QUESTION # 51
After deploying the VMware Cloud Foundation management domain, an administrator needs to configure backup for the components within the domain.
Which two steps are involved in configuring the backup of VMware Cloud Foundation management components? (Choose two.)

• A. Create a backup schedule on the SDDC manager to automate taking regular backups.
• B. Enable the vCenter Server snapshot manager on the SDDC Manager.
• C. Install a third-party backup solution on each ESXi host.
• D. Manually export the NSX configuration to the SDDC Manager.
• E. Configure an external SFTP backup repository on the SDDC Manager.

Answer: A,E

NEW QUESTION # 52
......

2V0-11.25 exam questions for practice in 2026 Updated 164 Questions: https://pass4sure.passtorrent.com/2V0-11.25-latest-torrent.html