Changing the Concept of NS0-184 Exam Preparation 2022
Getting NS0-184 Certification Made Easy! Get professional help from our NS0-184 Dumps PDF
NEW QUESTION 24
What is the default shelf ID for disk shelves with IOM12 modules?
- A. 0
- B. 01
- C. 1
- D. 00
Answer: D
NEW QUESTION 25
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?
- A. Cloud Manager
- B. ONTAP System Manager
- C. Active IQ Unified Manager
- D. Active IQ Config Advisor
Answer: B
NEW QUESTION 26
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)
- A. Active IQ Unified Manager
- B. AutoSupport packages
- C. Active IQ Digital Advisor
- D. ONTAP Cluster
Answer: A,D
NEW QUESTION 27
Click the Exhibit button.
Your ONTAP cluster shows the cluster network errors that are shown in the event log.
What is used by ONTAP software to log the errors that are shown in the exhibit?
- A. BGP
- B. EMS
- C. AutoSupport
- D. SNMP
Answer: B
NEW QUESTION 28
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. System Diagnostics
- B. Active IQ Unified Manager
- C. Active IQ Config Advisor
- D. Cloud Insights
Answer: A
NEW QUESTION 29
You completed a 2-node AFF A700 installation according to the poster. You run the disk show -fields owner command and notice that all drives are assigned to node 1.
In this scenario, which tool would you use to access documentation and guidelines to solve the issue?
- A. NET2
- B. Active IQ Unified Manager
- C. NetAppDocs
- D. Active IQ One Collect
Answer: C
NEW QUESTION 30
You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)
- A. Load the Storage RCF.
- B. Cable the AFF A250 nodes to the breakout ports on the switch.
- C. Cable the AFF A250 nodes to the next free ports on the switch.
- D. Load the Cluster-HA-Breakout RCF.
Answer: B,D
NEW QUESTION 31
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node2:e4a and node2:e8a.
- B. Swap node1:e4a and node1:e8a.
- C. Swap node1:e4a and node2:e4b.
- D. Swap node1:e8a and node2:e4a.
Answer: A
NEW QUESTION 32
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)
- A. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
- B. the ability to move the volumes from the old nodes to the new nodes
- C. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes
- D. the ability to create a 4-node MetroCluster across the four nodes
Answer: C,D
NEW QUESTION 33
You are deploying a new AFF All SAN Array A250 into a customer's existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration? (Choose two.)
- A. Cisco Data Center Network Manager (DCNM)
- B. Brocade SAN Health
- C. Active IQ Config Advisor
- D. Active IQ
Answer: A,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modular-system/flex-pod-datacenter-ucs-intersight.html
NEW QUESTION 34
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?
- A. NetAppDocs output report
- B. ONTAP System Manager
- C. Active IQ scheduled reports
- D. Active IQ Config Advisor worksheet
Answer: C
NEW QUESTION 35
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?
- A. Assign all data LIFs to Node 1.
- B. Perform a takeover of Node 2 to ensure that it does not run.
- C. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
- D. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
Answer: A
NEW QUESTION 36
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)
- A. storage VM
- B. switch
- C. node
- D. cluster
Answer: A,D
NEW QUESTION 37
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Disable out-of-band ACP.
- B. Enable in-band ACP.
- C. Remove the Ethernet cables.
- D. Move the SAS cables to a new stack.
Answer: A,D
NEW QUESTION 38
You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.
In this scenario, which method provides access to the logs from a Web browser?
- A. ADP
- B. ACP
- C. SPI
- D. DNS
Answer: C
NEW QUESTION 39
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
- A. password
- B. intercluster IP
- C. node management IP
- D. cluster management IP
- E. Advanced Drive Partitioning
Answer: B,C,D
NEW QUESTION 40
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Change the requirement for Ethernet cables.
- B. Install 10 meter NetApp supported copper cables.
- C. Change the requirement for optical cables.
- D. Relocate the switches or the AFF A400 so that the distance is less than five meters.
Answer: A,B
NEW QUESTION 41
You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.
In this scenario, which two statements are true? (Choose two.)
- A. The AFF A250 uses different ports for the cluster and the HA interconnect.
- B. The AFF A250 requires switches with 40GbE port support.
- C. The AFF A250 uses the same port for the cluster and the HA interconnect.
- D. The AFF A250 requires switches with 25GbE port support.
Answer: A,D
NEW QUESTION 42
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)
- A. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
- B. The LIFs must be in dedicated broadcast domains an IPspaces.
- C. The LIFs must use the default intercluster service policy.
- D. At least one LIF per node is required on each cluster.
Answer: B,C
NEW QUESTION 43
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.
In this scenario, which two commands would you use to accomplish this task? (Choose two.)
- A. system node autosupport history show
- B. system node autosupport invoke
- C. system node autosupport check show
- D. system node autosupport destination show
Answer: A,C
NEW QUESTION 44
You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.
Which documentation output would you present to the customer to satisfy this requirement?
- A. NetAppDocs output
- B. Active IQ Unified Manager output
- C. Config Advisor output
- D. Active IQ OneCollect output
Answer: C
NEW QUESTION 45
Click the Exhibit button.
You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to the cluster interconnect switches.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 46
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. intercluster LIF
- B. SVM management LIF
- C. SVM data LIF
- D. node management LIF
Answer: A
NEW QUESTION 47
......
NS0-184 Exam Crack Test Engine Dumps Training With 60 Questions: https://pass4sure.passtorrent.com/NS0-184-latest-torrent.html