[Feb-2022] Pass HP HPE0-S54 Tests Engine pdf - All Free Dumps [Q66-Q90]

[Feb-2022] Pass HP HPE0-S54  Tests Engine pdf - All Free Dumps

Designing HPE Server Solutions Practice Tests 2022 | Pass HPE0-S54 with confidence!

HP HPE0-S54 Exam Syllabus Topics:

Topic	Details
Topic 1	Given A Scenario, Identify Potential Design Issues With The Customer’s Existing Environment
Topic 2	Analyze The Success Criteria And Proposed POC Solution To Determine The Gap Between Them Explain How To Use The Appropriate Tools To Identify A Problem
Topic 3	Analyze Customer Information To Determine The Gap Between The Existing Customer Environment And The Documented Customer Needs
Topic 4	Compare And Contrast Available HA And DR Solutions, Match Them With The Customer’s Business Needs, And Available Budget|
Topic 5	Given A Customer’s Long-Term Vs Short-Term Needs, Determine A Solution With A Possible Upgrade Path
Topic 6	Describe The Steps For Performing Common Management Tasks Manage, Monitor, And Maintain Solutions Troubleshoot Solutions
Topic 7	Given A Scenario, Describe The Service Offerings That Meet The Business And IT Objectives
Topic 8	Plan And Design Solutions
Topic 9	Describe The Correlation Between A Remediation And Its Predicted Outcome Describe The Steps For Implementing The Design
Topic 10	Given A Scenario, Describe How To Generate The Customer Proposal (For Example, Bill Of Materials, TCO Report, Diagrams, Quote, Third-Party Items, Power And Cooling Statistics).
Topic 11	Given A Scenario, Map The Solution Benefits To The Original Customer Requirements And Respond To Customer Objections Raised By Key Stakeholders|
Topic 12	Determine Under Which Circumstances An Architect Would Propose Specific Industry Standard Server, Storage, Network Architectures And Technologies
Topic 13	Interpret Collected Data To Optimize Performance And Availability Interpret Collected Data For Lifecycle Management Operations
Topic 14	Given A Scenario, Determine An Appropriate Tool To Size, Specify, Or Build A Solution Install, Configure, And Set Up, Solutions

 

NEW QUESTION 66
A customer wants to implement HPE Synergy with 20Gb connectivity.
What should an architect emphasize during a meeting with this customer?

• A. 20Gb connectivity will require additional licenses applied to the downlink ports.
• B. SAS connectivity will be supported only on third fabric.
• C. A Composer must be installed in each frame.
• D. A maximum of 3 frames can be stacked together when 20 Gb connectivity is required.

Answer: A

 

NEW QUESTION 67
A customer wants to evaluate management software that will allow them to deploy firmware updates and monitor the health of their existing Gen9 and Gen10 servers.
What must you include in the PoC for the evalution?

• A. HPE One Configuration Advanced
• B. HPE OneView
• C. HPE Intelligent Provisioning
• D. HPE Insight Online

Answer: C

 

NEW QUESTION 68
You prepared a proposal for a customer that plans to deploy Hyper-V clusters that include network adapters with RoCE support. The customer would like to know why this specific adapter was included in the proposal.
How would you explain your choice?

• A. RoCE adapters offer Secure Encryption functionality that can help to secure migration traffic
• B. RoCE adapters can use 100 Gb/s speed for internal virtual machine migrations
• C. RoCE adapters will improve performance for live migration and Microsoft SMB Direct environments
• D. RoCE adapters are the only adapters certified to use in Hyper-V based cluster

Answer: C

 

NEW QUESTION 69
Which iLO 5 feature allows a customer to directly, physically connect to a ProLiant server to troubleshoot issues?

• A. iLO Service Port
• B. iLO Federation
• C. iLO mobile app
• D. iLO Amplifier Pack

Answer: A

 

NEW QUESTION 70
Which product automatically generates reports on collected lifecycle management events?

• A. Insight Online
• B. Insight Control
• C. HPE OneView
• D. HPE ONEView Global Dashboard

Answer: A

 

NEW QUESTION 71
What must a customer consider when adding an uplink set to a Logical Interconnect Group? (Choose two.)

• A. Logical Interconnects will need to be restarted
• B. Logical Interconnects will need to be updated from the group
• C. The associated Logical Interconnects will be flagged as inconsistent
• D. Additional Logical Interconnects will need to be created
• E. Logical Interconnects will automatically be restarted

Answer: A,B

 

NEW QUESTION 72
A c7000 customer wants to expand their server environment. You want to encourage them to move to Synergy to prepare them for the future.
Which question should you ask?

• A. Is there a requirement for enhanced security on the management network?
• B. Are they planning to purchase ProLiant Gen10 servers as part of the project?
• C. Do they want to maximize the memory footprint of their servers?
• D. Does their application workload benefit from persistent memory?

Answer: A

 

NEW QUESTION 73
Match the HPE management tool to the customer situation. (Each customer situation may be used more than once or not at all.)

Answer:

Explanation:

 

NEW QUESTION 74
Match the SSD drive type to the intended workload.

Answer:

Explanation:

 

NEW QUESTION 75
A customer has c7000 enclosures with Virtual Connect 20/40 F8 interconnect modules providing Ethernet and Fibre Channel connectivity. They are starting a proof of concept (PoC) to evaluate using a Synergy with the HPE Virtual Connect SE 40Gb F8 interconnect module as the next generation infrastructure.
Which additional component is required to enable the proof of concept solution to match the connectivity functionality of the current solution?

• A. OneView Advanced
• B. a Fibre Channel license
• C. iLO Advanced Premium Security
• D. Image Streamer

Answer: B

 

NEW QUESTION 76
A customer is designing an infrastructure and plans to host multiple tenants in the environment. The customer needs several thousand network segments to be used on a single physical network.
Which solution should the customer use?

• A. Virtual Connect FlexFabric
• B. Data Center Bridging
• C. Remote Direct Memory Access
• D. Overlay networks

Answer: D

 

NEW QUESTION 77
Your customer has completed a successful Synergy Proof of Concept (PoC) consisting of a single frame with dual composers and dual Virtual Connect SE 40Gb F8 modules.
The customer wants to:
add a second frame before they move into production

have unified management

have a separate logical enclosure for each frame

What are the basic steps to add the second frame? (Choose three.)

• A. Move the standby composer to the second frame.
• B. Disconnect the existing management ring, and then cable the FLM (frame link module) in the first frame to the FLMs in the second frame.
• C. Install a satellite module in the first frame.
• D. Move the bottom VC module from the first frame to the second.
• E. Move one of the uplinks from the FLM in the first frame to a FLM in the second.

Answer: A,B,E

 

NEW QUESTION 78
Match the SSD drive type to the intended workload.

Answer:

Explanation:

 

NEW QUESTION 79
A customer reports a recent SSD drive failure in an HPE D2220sb Storage Blade that hosts is Virtual Desktop Infrastructure environment. The customer is concerned about the remaining expected lifetime of the SSD drives in its array. Which tool includes the SmartSSD Wear Gauge report that identifies drives at risk failure?

• A. HPE SmartCache
• B. HPE OneView (Volumes screen)
• C. HPE Smart Storage Administrator
• D. Option ROM Configuration for Arrays

Answer: C

Explanation:
Explanation
Reference https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04455150

 

NEW QUESTION 80
A customer needs a Synergy solution using Image Streamer in a production environment.
What is the minimum number of Synergy frames needed for this solution?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815217.pdf

 

NEW QUESTION 81
A customer is learning about the performance enhancements of a new DL380 Gen10 system. How does this system help with performance problems?

• A. provides compatibility with Intel Broadwell processors
• B. provides scalable persistent memory
• C. eliminates the need for Service Level Agreements for Cloud services and VDI
• D. enables faster L4 cache on CPU

Answer: B

 

NEW QUESTION 82
A customer is expanding their blade based infrastructure managed by HPE OneView with an HPE Synergy platform. The customer is familiar with HPE OneView and wants to know if the same management procedures can be used to manage HPE Synergy platform.
How should you respond to this question?

• A. HPE Synergy must be managed with HPE Systems Insight Manager
• B. HPE Synergy can be managed using HPE OneView as long as a separate, dedicated HPE OneView appliance is deployed for HPE Synergy management.
• C. HPE Synergy can be managed using the same HPE OneView instance that is used to manage HPE BladeSystem platform.
• D. HPE Synergy can be managed by HPE Composer, which is running an embedded version of the HPE OneView

Answer: B

Explanation:
Explanation/Reference:

 

NEW QUESTION 83
Your customer wants to add additional five HPE Synergy frames to an existing environment based on ten frames. The customer wants to know how to add new frames to existing infrastructure. How should you explain the expansion process?

• A. Add additional HPE Composer to match a 3:1 frame-to -Composer ratio
• B. Discover new frames in HPE Composer, and add them to the existing logical enclosure
• C. Add new frames to the existing management ring using Frame Link Modules
• D. Add required licenses to the HPE Composer, and add them to the existing logical enclosure

Answer: C

Explanation:
Explanation/Reference:

 

NEW QUESTION 84
A customer is using a DL380 Gen10. They attempt to boot an installation media ISO with iLO Virtual Media, and the system fails to access the ISO. What are the most likely causes of this issue? (Select two.)

• A. Legacy Boot is not enabled and the media is not UEFI compatible
• B. HPSSA drives are configured for RAID 1 and not RAID 5
• C. Secure Boot has derived access to the ISO
• D. The ISO operating system is not supported by HPE
• E. UEFI is not configured for iSCSI initiator support

Answer: C,D

 

NEW QUESTION 85
During the ProLiant Gen10 implementation process you need to ensure that HPE Smart Array controller and NVDIMM memory will have backup power in case of power outage.
Which component do you need to install?

• A. HPE iLO Advanced license
• B. HPE Smart Storage Battery
• C. Battery backed write cache
• D. HPE Power Advisor

Answer: B

 

NEW QUESTION 86
A customer needs a solution to support Online Transaction Processing (OLTP) and database workloads.
Which Gen10 technology would optimize the environment for the customer?

• A. workload profiles
• B. OneView
• C. Silicon Root of Trust
• D. REST API

Answer: A

 

NEW QUESTION 87
One of the DL380 Gen10 servers in your infrastructure has failed to boot after a 3rd party PCle NIC was installed.
What is the most likely cause of this issue?

• A. The latest Support pack for ProLiant must be used before accessing any additional 3rd party products in the server.
• B. The iLO interface did not have a correct IP address provided from DHCP.
• C. The manufacturer did not digitally sign the correct firmware and HPE Secure Boot halted the process.
• D. HPE does not allow 3rd party PCle cards.

Answer: C

 

NEW QUESTION 88
A customer has a traditional physical server environment and would like to run an on-site proof of concept (PoC) to evaluate OneView's ability to manage their ProLiant DL380's and their c7000 blades. What does the customer need to implement this PoC?

• A. iLO Amplifier Pack
• B. Synergy composer
• C. Synergy Image Streamer
• D. a supported hypervisor

Answer: A

 

NEW QUESTION 89
A customer reports a recent SSD drive failure in an HPE D2220sb Storage Blade that hosts its Virtual Desktop Infrastructure environment. The customer is concerned about the remaining expected lifetime of the SSD drives in its array. Which tool includes the SmartSSD Wear Gauge report that identifies drives at risk of failure?

• A. HPE SmartCache
• B. HPE OneView (Volumes screen)
• C. HPE Smart Storage Administrator
• D. Option ROM Configuration for Arrays

Answer: C

Explanation:
Explanation/Reference:
Reference https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04455150

 

NEW QUESTION 90
......

Online Exam Practice Tests with detailed explanations!: https://pass4sure.passtorrent.com/HPE0-S54-latest-torrent.html