(Oct-2026) 350-401 Exam Dumps Contains FREE Real Quesions from the Actual Exam
Free Test Engine Verified By CCNP Enterprise Certified Experts
NEW QUESTION # 217
Refer to the exhibit.
An engineer must configure HSRP for VLAN 1000 on SW2.
The secondary switch must immediately take over the role of active router.
If the interlink with the primary switch fails. Which command set completes this task?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 218
Which two actions, when applied in the LAN network segment, will facilitate Layer 3 CAPWAP discovery for lightweight AP? Choose two.)
- A. Enable port security on the switch port.
- B. Configure WLC IP address LAN switch.
- C. Utilize DHCP option 17.
- D. Configure an IP helper-address on the router interface.
- E. Utilize DHCP option 43.
Answer: D,E
Explanation:
For Layer 3 CAPWAP discovery of lightweight APs in the LAN network segment, two actions that facilitate this process are:
* Configuring an IP helper-address on the router interface (B): This action helps forward DHCP requests from the APs to the DHCP server, which can then provide the necessary information for the APs to discover the controller.
* Utilizing DHCP option 43 (E): This DHCP option allows the DHCP server to provide the IP address of
* the Wireless LAN Controller (WLC) to the APs, enabling them to discover and join the controller.
NEW QUESTION # 219
In a Cisco SD-Access wireless environment, which device is responsible for hosting the anycast gateway?
- A. control plane node
- B. fabric border node
- C. fabric edge node
- D. fusion router
Answer: C
Explanation:
Inter-VLAN traffic is attracted to the edge node because the AnyCast gateway for the end hosts resides there.
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html
NEW QUESTION # 220
Drag and drop the Qos mechanisms from the left to the correct descriptions on the right
Answer:
Explanation:
NEW QUESTION # 221
Drag and drop the REST API authentication methods from the left onto their descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 222
An engineer configures a WLAN with fast transition enabled Some legacy clients fail to connect to this WLAN Which feature allows the legacy clients to connect while still allowing other clients to use fast transition based on then OLTIs?
- A. over the DS
- B. 802.11k
- C. 802.11V
- D. adaptive R
Answer: D
Explanation:
The feature that allows legacy clients to connect to a WLAN with fast transition enabled, while still permitting other clients to use fast transition based on their OLTIs, is known as adaptive R. This feature enables the WLAN to support both Fast Transition (FT) and non-FT clients by setting the Fast Transition mode to Enabled and selecting both an FT and non-FT Authenticated Key Management (AKM), such as PSK and FT-PSK. This configuration allows non-FT devices to connect without FT, while FT-compatible devices can utilize FT for faster roaming.
NEW QUESTION # 223
Drag and drop the description from the left onto the correct QoS components on the right.
Answer:
Explanation:
Explanation
Traffic Policing: Drops excessive Traffic, causes TCP retransmissions, introduce no delay/jitter Shaping: buffers, excessive traffic, introduce delay and jitter, typically delays, rather than drops traffic
NEW QUESTION # 224
Which of the following are valid statements when configuring Nonstop Forwarding (NSF) with Stateful Switchover (SSO) on a Cisco device? (Choose two.)
- A. HSRP is not supported with NSF/SSO
- B. supports multicast routing protocols
- C. Supports IPv4 and IPv6
- D. Improper implementation of NSF/SSO can result in routing loops
- E. Nonstop Forwarding requires SSO to also be configured
Answer: A,E
Explanation:
NSF capability is supported for IPv4 routing protocols only. NSF capability is not supported for IPv6 routing protocols.
NSF does not support IP Multicast Routing, as it is not SSO-aware.
You must configure SSO in order to use NSF with any supported protocol.
The Hot Standby Routing Protocol (HSRP) is not supported with NSF SSO. Do not use HSRP with NSF SSO.
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/16-
6/configuration_guide/stck_mgr_ha/b_166_nsf_sso_9400_cg.html
NEW QUESTION # 225
A network engineer configures a new GRE tunnel and enters the show run command.
What does the output verify?
- A. The default MTU of the tunnel interface is 1500 byte.
- B. The tunnel destination will be known via the tunnel interface
- C. The tunnel keepalive is configured incorrectly because they must match on both sites
- D. The tunnel will be established and work as expected
Answer: B
Explanation:
The tunnel destination will be known by the tunnel interface when we do traceroute.
Please note that ospf protocol on Site A and Site B routers causes error " %TUN-5- RECURDOWN" which keep on flapping the GRE tunnel. Only upon removing the ospf configuration the GRE tunnel will become normal.
NEW QUESTION # 226 
Refer to the exhibit What does this Python script do?
- A. writes the username for a specific IP address into a light database
- B. reads the username for a specific IP address from a light database
- C. enters the RAOIUS username for a specific IP address
- D. enters the TACACS* username for a specific IP address
Answer: A
NEW QUESTION # 227
Refer to the exhibit.
SwitchC connects HR and Sales to the Core switch However, business needs require that no traffic from the Finance VLAN traverse this switch Which command meets this requirement?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: A
NEW QUESTION # 228
A network administrator is designing a new network for a company that has frequent power spikes. The company wants to ensure that employees can the best solution for the administrator to recommend?
- A. Uninterruptible power supply
- B. Redundant power supplies
- C. Generator
- D. Cold site
Answer: A
Explanation:
An uninterruptible power supply (UPS) is the best solution to ensure continuous power to the network equipment during power spikes and outages. A UPS provides immediate backup power and allows for a safe shutdown of equipment, preventing data loss and hardware damage.
NEW QUESTION # 229
Drag and drop the wireless elements on the left to their definitions on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 230
Refer to the exhibit.
The WLC administrator sees that the controller to which a roaming client associates has Mobility Role Anchor configured under Clients > Detail. Which type of roaming is supported?
- A. Indirect
- B. Intracontroller
- C. Layer 2 intercontroller
- D. Layer 3 intercontroller
Answer: D
NEW QUESTION # 231 
Answer:
Explanation:
See the solution below in Explanation:
Explanation:
Solution:
VERIFICATION: -
OR
NEW QUESTION # 232
What is the function of a fabric border node in a Cisco SD-Access environment?
- A. To handle an ordered list of IP addresses and locations for endpoints in the fabric.
- B. To attach and register clients to the fabric.
- C. To collect traffic flow information toward external networks.
- D. To connect the Cisco SD-Access fabric to another fabric or external Layer 3 networks.
Answer: D
Explanation:
Border Node: The border nodes serve as the gateways between the Cisco SD-Access fabric and external networks.
NEW QUESTION # 233
What is a characteristic of para-virtualization?
- A. Para-virtualization allows the host hardware to be directly accessed
- B. Para-virtualization guest servers are unaware of one another
- C. Para-virtualization allows direct access between the guest OS and the hypervisor
- D. Para-virtualization lacks support for containers
Answer: A
NEW QUESTION # 234
Refer to the Exhibit.
An engineer is installing a new pair of routers in a redundant configuration. When checking on the standby status of each router the engineer notices that the routers are not functioning as expected. Which action will resolve the configuration error?
- A. configure matching hold and delay timers
- B. configure matching key-strings
- C. configure unique virtual IP addresses
- D. configure matching priority values
Answer: B
Explanation:
From the output exhibit, we notice that the key-string of R1 is Cisco123! (letter C is in capital) while that of R2 is cisco123!. This causes a mismatch in the authentication so we have to fix their key-strings.
key-string [encryption-type] text-string: Configures the text string for the key. The text-string argument is alphanumeric, case-sensitive, and supports special characters.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/security/configuration/guide/b_Ci
NEW QUESTION # 235
Which access point mode allows a supported AP to function like a WLAN client would, associating and identifying client connectivity issues?
- A. sensor mode
- B. sniffer mode
- C. SE-connect mode
- D. client mode
Answer: A
Explanation:
Explanation
As these wireless networks grow especially in remote facilities where IT professionals may not always be onsite, it becomes even more important to be able to quickly identify and resolve potential connectivity issuesideally before the users complain or notice connectivity degradation. To address these issues we have created Cisco's Wireless Service Assurance and a new AP mode called "sensor"mode. Cisco's Wireless Service Assurance platform has three components, namely, Wireless PerformanceAnalytics, Real-time Client Troubleshooting, and Proactive Health Assessment. Using a supported AP ordedicated sensor the device can actually function much like a WLAN client would associating andidentifying client connectivity issues within the network in real time without requiring an IT or technician to beon site.
Reference:
https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/dam/en/us/td/docs/wireless/controller/techn
NEW QUESTION # 236
......
Use Real Cisco Achieve the 350-401 Dumps - 100% Exam Passing Guarantee: https://pass4sure.passtorrent.com/350-401-latest-torrent.html