Updated Jan 31, 2022 Verified Pass 300-425 Exam in First Attempt Guaranteed
Free 300-425 Sample Questions and 100% Cover Real Exam Questions (Updated 113 Questions)
Conclusion
The Cisco 300-425 exam intends for you to master practical issues around wireless networks, and specifically those associated with the enterprise. Training and guidebooks are present to build your potential in this key sphere. So, anyone looking around for a beefing up of their skills in the sector should see to them that he or she takes and passes the actual test with ease.
More Details for Exam 300-425
Candidates looking forward to 300-425 have to hold skills which come by thoroughly exploring the aspect of developing wireless networks. Topics to venture into include site surveys, wireless in addition to wired architecture, high availability for wireless LAN, and mobility. Proving abilities in these areas is through a test lasting for 1.5 hours and presented in the English language and Japanese. Professional concentration tests like 300-425 go for $300. About the passing score, Cisco does not state the minimum points to get for one to be accredited. But it is always good to strive to get very high marks and promote your chances of passing. Revision guides and training serve the great purpose of assisting exam-takers to build appropriate knowledge around the stated topics.
NEW QUESTION 26
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
- A. It is a CAPWAP tunnel with data path only.
- B. It is an IPsec tunnel with control path and data path.
- C. It is a CAPWAP tunnel with control path and data path.
- D. It is an IPsec tunnel with control path only.
Answer: C
Explanation:
NEW QUESTION 27
A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?
- A. Band Select
- B. RRM
- C. Cisco Centralized Key Management
- D. load balancing
Answer: A
Explanation:
NEW QUESTION 28
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?
- A. overlapping -67 dBm coverage from two access points
- B. overlapping -72 dBm coverage from two access points
- C. continuous -67 dBm coverage from one access point
- D. continuous -72 dBm coverage from one access point
Answer: C
Explanation:
Explanation
So -67dBm covers both Data & Voice with a single AP
NEW QUESTION 29
A company wants to replace its existing PBX system with a new VoIP System that will include wireless IP phones. The CIO has concerns about whether the company's existing wireless network can support the new system. Which tool in Cisco Prime can help ensure that the current network will support the new phone system?
- A. Site Calibration
- B. Map Editor
- C. Location Readiness
- D. Voice Readiness
Answer: D
Explanation:
NEW QUESTION 30
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
So, each AP will have 25 clients. Minimum 4 APs are sufficient.
NEW QUESTION 31
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A. the client with the worst RF characteristics
- B. the client that is used least by the company
- C. the client that is used most by the company
- D. the client that has the highest RF properties
Answer: A
Explanation:
Explanation
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_A
NEW QUESTION 32
Which statement about AP failover priority for access points when configured with priority 1 or 4 is true?
- A. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
- B. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.
- C. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.
- D. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
Answer: D
Explanation:
NEW QUESTION 33
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. -85 to -65 dBm
- B. -85 to -67 dBm
- C. -78 to -65 dBm
- D. -72 to -67 dBm
Answer: B
NEW QUESTION 34
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
- A. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
- B. Deploy environmentally friendly cabling components to blend into the environment.
- C. Paint the access point to cover the LED from being noticeable.
- D. Use enclosures to hide the wireless infrastructure in the surrounding environment.
Answer: B
Explanation:
NEW QUESTION 35
Which technology provides a multichassis IP connection between VSS-enabled switches and downstream devices?
- A. PAgP
- B. LACP
- C. ICCP
- D. LAG
- E. BFD
- F. MEC
Answer: F
NEW QUESTION 36
Campus users report a poor wireless experience. An engineer investigating the issue notices that in high-density areas, the wireless clients fail to switch the AP to which are automatically connected. This sticky client behavior is causing roaming issues. Which feature must the engineer configure?
- A. optimized roaming
- B. Layer 2 roaming
- C. Load balancing and band select
- D. Layer 3 roaming
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/80/hdx_final/b_hdx_dg_final/high_den
NEW QUESTION 37
You made changes to a VLAN, but the changes were not propagated to the other switches in the VTP domain.
You enter a show vtp command at the switch where the changes were made, which displays the following output:
What should you do to solve this problem?
- A. Disable VTP pruning.
- B. Change the VTP operating mode to server.
- C. Upgrade the VTP version to version 2.
- D. Upgrade the VTP version to version 3.
Answer: B
Explanation:
The output of the show vtp command shows that the VTP operating mode is transparent mode. This means that you can make VLAN changes on the switch, but they will only affect that switch. Changes will not be propagated to other switches in the Layer 2 network. You will need to change the operating mode to server if you want to VLAN changes to be propagated to other switches.
To change the VTP operating mode to server, you would enter the vtp server global command as shown:
switch1#(config) vtp server
You should not disable VTP pruning. This will have no effect on the propagation. You must change the mode of the switch.
You should not upgrade the VTP version to version 2 or version 3. This will have no effect on the propagation.
You must change the mode of the switch.
Objective:
Layer 2 Technologies
Sub-Objective:
Configure and verify trunking
References:
Cisco > Cisco IOS LAN Switching Command Reference > udld through vtp v2-mode > vtp server
NEW QUESTION 38
An enterprise is using the wireless network as the mam network connection for corporate users and guests To ensure wireless network availability, two standalone controllers are installed in the head office APs are connected to the controllers using a round-robin approach lo load balance the traffic After a power cut, the wireless clients disconnect while roaming An engineer tried eping from the controller but fails Which protocol needs to be allowed between the networks that the controllers are Installed?
- A. IP Protocol 67
- B. IP Protocol 97
- C. IP Protocol 87
- D. IP Protocol 77
Answer: B
NEW QUESTION 39
A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?
- A. Band Select
- B. RRM
- C. Cisco Centralized Key Management
- D. load balancing
Answer: A
Explanation:
NEW QUESTION 40
An engineer has performed a predictive site survey for high-speed data and voice in an indoor office. What is the recommended data rate with −67 dBm signal level for optimal VoWLAN design?
- A. 6 Mbps on 802.11 bgn
- B. 12 Mbps on 802.11 an
- C. 24 Mbps on 802.11 an
- D. 24 Mbps on 802.11 bgn
Answer: D
Explanation:
Section: Wireless Site Survey
NEW QUESTION 41
A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?
- A. Band Select
- B. RRM
- C. Cisco Centralized Key Management
- D. load balancing
Answer: A
Explanation:
NEW QUESTION 42
......
Download Real Cisco 300-425 Exam Dumps Test Engine Exam Questions: https://pass4sure.passtorrent.com/300-425-latest-torrent.html